Show Ip Bgp Route-Map (Bgp Only) - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
- (BGP
SHOW IP BGP ROUTE MAP

show ip bgp route-map (BGP only)

Overview Use this command to display BGP routes that match the specified route-map
within an IPv4 environment. Use the
command to display BGP4+ routes that match the specified route-map within an
IPv6 environment.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip bgp route-map <route-map>
Syntax
show ip bgp [global|vrf <vrf-name>] route-map <route-map>
Syntax [VRF]
Mode User Exec and Privileged Exec
To show routes that match the route-map myRouteMap for the global routing
Examples
instance, use the command:
awplus#
To show routes that match the route-map myRouteMap, use the command:
awplus#
Related show bgp ipv6 route-map (BGP4+ only)
Commands
Command Version 5.4.6-2.1: VRF-lite support added.
changes
C613-50186-01 Rev B
)
ONLY
Parameter Description
global
When VRF-lite is configured, apply the command to the global
routing and forwarding table.
vrf
Apply the command to the specified VRF instance.
<vrf-name>
The name of the VRF instance.
<route-map>
Specifies a route-map that is matched.
show ip bgp global route-map myRouteMap
show ip bgp route-map myRouteMap
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
show bgp ipv6 route-map (BGP4+ only)
"Getting Started
Guide.
1368