Allied Telesis AR2050V Command Reference Manual page 615

PPP C
OMMANDS
(PPP)
SHOW INTERFACE
Figure 19-7: Example output from the show interface command for a PPPoE
C613-50186-01 Rev B
interface
awplus#show interface ppp0 

Interface ppp0 
Scope: both 
Link is UP, administrative state is UP 
Hardware is PPP 
IPv4 address 10.1.0.2/32 
IPv6 address fe80::200:cdff:fe28:8a1/10 
index 16778440 metric 1 
<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> 
VRF Binding: Not bound 
PPP is running over interface eth0 
PPPoE is using the default service 
SNMP link-status traps: Disabled 
input packets 12, bytes 458, dropped 0, multicast packets 0 
output packets 6, bytes 122, multicast packets 0 broadcast
packets 0 
Time since last state change: 0 days 00:01:57 
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
615