Allied Telesis AR2050V Command Reference Manual page 1537

VRF- C
LITE OMMANDS
SSH
Mode User Exec and Privileged Exec
Examples To login to the remote SSH server at 192.0.2.5, use the command:
awplus#
To login to the remote SSH server at 192.0.2.5 as user "manager", use the
command:
awplus#
To login to the remote SSH server at 192.0.2.5 that is listening TCP port 2000, use
the command:
awplus#
To login to the remote SSH server with example_host using IPv6 session, use the
command:
awplus#
To run the cmd command on the remote SSH server at 192.0.2.5, use the
command:
awplus#
Example To login to the remote SSH server at 192.168.1.1 on VRF "red", use the command:
(VRF-lite)
awplus#
Related crypto key generate userkey
Commands
crypto key pubkey-chain knownhosts
debug ssh client
ssh client
Command Version 5.4.6-2.1: VRF-lite support added.
changes
C613-50186-01 Rev B
Parameter Description
<hostname>
IPv4/IPv6 address or hostname of a remote server. The address is in
the format A.B.C.D for an IPv4 address, or in the format X:X::X:X for
an IPv6 address. Note that a hostname specified with SSH cannot
begin with a hyphen (-) character.
<line>
A command to execute on the remote server. If a command is
specified, the command is executed on the remote SSH server and
the session is disconnected when the remote command finishes.
ssh ip 192.0.2.5
ssh ip user manager 192.0.2.5
ssh port 2000 192.0.2.5
ssh ipv6 example_host
ssh ip 192.0.2.5 cmd
ssh vrf red 192.168.1.1
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1537