Show Bgp Ipv6 Route-Map (Bgp4+ Only) - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
6 - (BGP4+
SHOW BGP IPV ROUTE MAP

show bgp ipv6 route-map (BGP4+ only)

Overview Use this command to display BGP4+ routes that match the specified route-map
within an IPv6 environment. Use the
to display BGP routes that match the specified route-map within an IPv4
environment.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show bgp ipv6 route-map <route-map>
Syntax
Mode User Exec and Privileged Exec
To show routes that match the route-map myRouteMap, use the command:
Example
awplus#
Related show ip bgp route-map (BGP only)
Commands
C613-50186-01 Rev B
)
ONLY
Parameter Description
<route-map>
Specifies a route-map that is matched.
show bgp ipv6 route-map myRouteMap
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
show ip bgp route-map (BGP only) command
"Getting Started
Guide.
1332