Ipv6 Nd Ra-Lifetime - Allied Telesis AR2050V Command Reference Manual

IP 6 C
V OMMANDS
6 -
IPV ND RA LIFETIME

ipv6 nd ra-lifetime

Overview Use this command to specify the time period that this router can usefully act as a
default gateway for the network. Each router advertisement resets this time
period.
Use no parameter with this command to reset the value to default.
Syntax ipv6 nd ra-lifetime <seconds>
no ipv6 nd ra-lifetime
Default 1800 seconds
Mode Interface Configuration for a VLAN interface or a PPP interface.
Usage This command specifies the lifetime of the current router to be announced in IPv6
Router Advertisements.
Advertisement flags will not be transmitted unless you have applied the
suppress-ra
To set the advertisement lifetime of 8000 seconds on the VLAN interface vlan4,
Examples
use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
To set the advertisement lifetime of 8000 seconds on the PPP interface ppp0, use
the following commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
Related ipv6 nd suppress-ra
Commands
ipv6 nd prefix
C613-50186-01 Rev B
command. This instruction is included in the example shown below.
configure terminal
interface vlan4
ipv6 nd ra-lifetime 8000
no ipv6 nd suppress-ra
configure terminal
interface ppp0
ipv6 nd ra-lifetime 8000
no ipv6 nd suppress-ra
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
ipv6 nd
774