Show Ip Rip Vrf Database - Allied Telesis AR2050V Command Reference Manual

RIP C
OMMANDS

SHOW IP RIP VRF DATABASE

show ip rip vrf database
Overview Use this command to display information about the RIP database that is associated
with a specific VRF instance.
Entering this command with the full option included, will display information
about the full RIP database (including sub-optimal routes) associated with a
specific VRF instance.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip rip {vrf <vrf-name>|global} database [full]
Syntax
Mode User Exec and Privileged Exec
Example To display information about the RIP database associated with a VRF instance
'blue', use the command:
awplus#
Output Figure 25-3: Example output from the show ip rip vrf blue database command
Codes: R - RIP, Rc - RIP connected, Rs - RIP static
C - Connected, S - Static, O - OSPF, B - BGP

Network
Rc 192.168.30.0/24
R 192.168.45.0/24
Related show ip rip
Commands
Command Version 5.4.6-2.1: VRF-lite support added.
changes
C613-50186-01 Rev B
Parameter Description
vrf
Specific VRF instance.
<vrf-name>
The name of the VRF instance.
global
The global routing and forwarding table.
full
Specify the full RIP database including sub-optimal RIP routes.
show ip rip vrf blue database
Next Hop
192.168.30.1
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Metric From
1
2 192.168.30.1
"Getting Started
Guide.
If Time
vlan3
vlan3 02:46
866