L2Tp Peer-Address Dns-Lookup - Allied Telesis AR2050V Command Reference Manual

PPP E (PPP E) C
OVER THERNET O
2 - -
L TP PEER ADDRESS DNS LOOKUP

l2tp peer-address dns-lookup

Overview Use this command to set the LNS address to use via a DNS lookup from the
username email domain for this PPPoE Access Concentrator service.
Use the no variant of this command to remove the DNS lookup setting for this
PPPoE AC service.
Syntax l2tp peer-address dns-lookup [prefix <prefix>|]
no l2tp peer-address
Default This command is not set by default.
Mode PPPoE Access Concentrator Configuration
Example To set the LNS address to use via a DNS lookup for the PPPoE AC service
'ISP-service', use the commands:
awplus#
awplus(config)#
awplus(config-pppoe-ac)#
To set the LNS address to use via a DNS lookup and prepend "lns" to the domain
name portion of the username, use the commands:
awplus#
awplus(config)#
awplus(config-pppoe-ac)#
lns
To remove the DNS lookup setting for the PPPoE AC service 'ISP-service', use the
commands:
awplus#
awplus(config)#
awplus(config-pppoe-ac)#
Related destination l2tp
Commands
l2tp peer-address radius-lookup group
l2tp peer-address static
l2tp profile
pppoe-ac
ppp-auth-protocol
C613-50186-01 Rev B
OMMANDS
Parameter Description
<prefix>
A string to prepend to the domain name portion of the username.
configure terminal
pppoe-ac ISP-service
configure terminal
pppoe-ac ISP-service
configure terminal
pppoe-ac ISP-service
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
l2tp peer-address dns-lookup
l2tp peer-address dns-lookup prefix
no l2tp peer-address
623