Ddns-Update-Method - Allied Telesis AR2050V Command Reference Manual

D N S (DNS) C
OMAIN AME ERVICE
- -
DDNS UPDATE METHOD

ddns-update-method

Overview Use this command to create a new DDNS update method and enter DDNS Update
Method Configuration mode.
Use the no variant of this command to remove a DDNS update method.
Syntax ddns-update-method <method-name>
no ddns-update-method <method-name>
Default None
Mode Global Configuration
Example To create a method named "dyndns", use the commands:
awplus#
awplus(config)#
awplus(config-ddns-update-method)#
Related ddns enable
Commands
ddns-update now
debug ddns
host-name (DDNS)
ip ddns-update-method
ipv6 ddns-update-method
password (DDNS)
retry-interval (DDNS)
show ddns-update-method status
suppress-ipv4-updates (DDNS)
undebug (DDNS)
update-interval (DDNS)
update-url (DDNS)
use-ipv4-for-ipv6-updates (DDNS)
username (DDNS)
Command Version 5.4.7-0.1: command added
changes
C613-50186-01 Rev B
OMMANDS
Parameter Description
<method-name>
The name of the DDNS method.
configure terminal
ddns-update-method dyndns
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
705