Router Rip - Allied Telesis AR2050V Command Reference Manual

RIP C
OMMANDS

ROUTER RIP

router rip
Overview Use this global command to enter Router Configuration mode to enable the RIP
routing process.
Use the no variant of this command to disable the RIP routing process.
Syntax router rip
no router rip
Mode Global Configuration
Example This command is used to begin the RIP routing process:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router)#
awplus(config-router)#
awplus(config-router)#
Related network (RIP)
Commands
version (RIP)
C613-50186-01 Rev B
configure terminal
router rip
version 1
network 10.10.10.0/24
network 10.10.11.0/24
neighbor 10.10.10.10
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
858