Match Ip Address - Allied Telesis AR2050V Command Reference Manual

R M C
OUTE AP OMMANDS

MATCH IP ADDRESS

match ip address
Overview Use this command to add an IP address prefix match clause to a route map entry.
You can specify the prefix or prefixes to match by specifying the name of the prefix
list. To create the prefix list, enter Global Configuration mode and use the ip
prefix-list command.
A route matches the route map entry if the route's prefix matches the prefix list.
Each entry of a route map can have at most one one prefix list-based IP address
match clause. If the route map entry already has one match clause, entering this
command replaces that match clause with the new clause.
Note that prefix lists and route map entries all specify an action of deny or permit.
The action in the prefix list determines whether the route map checks update
messages and routes for a given prefix. The route map action and its set clauses
determine what the route map does with routes that contain that prefix.
A route matches the route map entry if the route's prefix matches the prefix list.
Each entry of a route map can have at most one prefix list-based IP address match
clause. If the route map entry already has one match clause, entering this
command replaces that match clause with the new clause.
Note that prefix lists and route map entries all specify an action of deny or permit.
The action in the prefix list determines whether the route map checks update
messages and routes for a given prefix. The route map action and its set clauses
determine what the route map does with routes that contain that prefix.
Use the no variant of this command to remove the IP address match clause from a
route map entry. To remove a prefix list-based match clause you must also specify
the prefix-list parameter.
match ip address prefix-list <prefix-listname>
Syntax
no match ip address prefix-list <prefix-listname>
Mode Route-map Configuration
Usage The match ip address command specifies the IP address to be matched. The
outcome of matching against the IP address is:
•
•
C613-50186-01 Rev B
Parameter
prefix-list
<prefix-listname>
If there is a match for the specified IP address, and permit is specified, then
the route is redistributed or controlled, as specified by the set action.
If there is a match for the specified IP address, and deny is specified, then the
route is not redistributed or controlled.
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Use an IP prefix list to specify which prefixes to match.
The prefix list name.
1387