Allied Telesis AR2050V Command Reference Manual page 1453

VRF- C
LITE OMMANDS
-
CRYPTO KEY PUBKEY CHAIN KNOWNHOSTS
Usage This command adds a public key of the specified SSH server to the known host
database on the device. The key is retrieved from the server. The remote SSH server
is verified by using this public key. The user is requested to check the key is correct
before adding it to the database.
If the remote server's host key is changed, or if the device does not have the public
key of the remote server, then SSH clients will inform the user that the public key
of the server is altered or unknown.
To add the RSA host key of the remote SSH host IPv4 address 192.0.2.11 to the
Examples
known host database, use the command:
awplus#
To delete the second entry in the known host database, use the command:
awplus#
To add the RSA host key of the remote SSH host IPv4 address 192.0.2.11 in VRF
Examples
red to the known host database, use the command:
(VRF-lite)
awplus#
To delete the second entry in the known host database in VRF red, use the
command:
awplus#
Validation show crypto key pubkey-chain knownhosts
Commands
Command Version 5.4.6-2.1: VRF-lite support added.
changes
C613-50186-01 Rev B
crypto key pubkey-chain knownhosts 192.0.2.11
no crypto key pubkey-chain knownhosts 2
crypto key pubkey-chain knownhosts vrf red 192.0.2.11
no crypto key pubkey-chain knownhosts vrf red 2
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1453