Undebug Ppp - Allied Telesis AR2050V Command Reference Manual

PPP C
OMMANDS

UNDEBUG PPP

undebug ppp
Overview Use this command to disable PPP protocol debugging on the specified PPP
interface or interfaces. If no PPP interface is specified then PPP debugging for all
PPP interfaces is disabled.
This command has the same functionality as the no variant of the
command.
undebug ppp [interface <ppp-interface-list>]
Syntax
Default No diagnostic messages are enabled for PPP debugging. PPP debugging is
disabled by default.
Mode Privileged Exec
Usage Note that this command is an alias of the negated form of the
command.
Examples To disable PPP debugging for all PPP interfaces, enter the below command:
awplus#
To disable PPP debugging for PPP interfaces ppp0, enter the below command:
awplus#
To disable PPP debugging for PPP interfaces ppp0 through ppp2, enter the below
command:
awplus#
To disable PPP debugging for PPP interfaces ppp0 and ppp2, enter the below
command:
awplus#
Related debug ppp
Commands
no debug all
show debugging ppp
undebug all
C613-50186-01 Rev B
Parameter
<ppp-interface-list> Specify a PPP interface or a range of PPP interfaces in
undebug ppp
undebug ppp interface ppp0
undebug ppp interface ppp0-ppp2
undebug ppp interface ppp0,ppp2
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
the range ppp<0-255>. Use a hyphen between PPP
interfaces to include all PPP interfaces in a given range,
or use commas between PPP interfaces to specify
non-contiguous PPP interfaces.
debug ppp
debug ppp
618