L2Tp Peer-Address Static - Allied Telesis AR2050V Command Reference Manual

PPP E (PPP E) C
OVER THERNET O
2 -
L TP PEER ADDRESS STATIC

l2tp peer-address static

Overview Use this command to set the IP address or fully qualified domain name of the L2TP
peer (LNS) to which the L2TP tunnel should be established for this PPPoE Access
Concentrator route.
Use the no variant of this command to remove the configured L2TP peer (LNS)
address.
l2tp peer-address static
Syntax
{<l2tp-peer-ip-address>|<l2tp-peer-domain-name>}
no l2tp peer-address
Default No L2TP peer address is configured by default.
Mode PPPoe Access Concentrator Configuration
Example To configure L2TP to tunnel all users to the LNS located at IP address 192.168.11.2,
use the commands:
awplus#
awplus(config)#
awplus(cinfig-pppoe-ac)#
To configure L2TP to tunnel all users to the LNS located at domain
foo.mydomain.org, use the commands:
awplus#
awplus(config)#
awplus(config-pppoe-ac)#
foo.mydomain.org
To remove the configured peer (LNS) address, use the commands:
awplus#
awplus(config)#
awplus(cinfig-pppoe-ac)#
Related destination l2tp
Commands
l2tp peer-address dns-lookup
l2tp peer-address radius-lookup group
C613-50186-01 Rev B
OMMANDS
Parameter
<l2tp-peer-ip-address>
<l2tp-peer-domain-name> The fully-qualified domain name of the L2TP peer
configure terminal
pppoe-ac ISP-service
configure terminal
pppoe-ac ISP-service
configure terminal
pppoe-ac ISP-service
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The IPv4 address of the L2TP peer (LNS) for this
PPPoE AC route, in dotted-decimal format.
(LNS) for this PPPoE AC route.
l2tp peer-address static 192.168.11.2
l2tp peer-address static
no l2tp peer-address
626