Rip Commands; Introduction - Allied Telesis AR2050V Command Reference Manual

25

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
RIP.
For information about configuring RIP, see the
Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50186-01 Rev B
Guide.
"accept-lifetime" on page 814
"address-family ipv4 (RIP)" on page 816
"alliedware-behavior" on page 817
"cisco-metric-behavior
"clear ip rip route" on page 820
"debug rip" on page 822
"default-information originate
"default-metric (RIP)" on page 824
"distance (RIP)" on page 825
"distribute-list (RIP)" on page 826
"fullupdate (RIP)" on page 827
"ip rip authentication key-chain" on page 828
"ip rip authentication mode" on page 830
"ip rip authentication string" on page 833
"ip rip receive-packet" on page 835
"ip rip receive version" on page 836
"ip rip send-packet" on page 837
"ip rip send version" on page 838
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x

RIP Commands

RIP Feature Overview and
(RIP)" on page 819
(RIP)" on page 823
812