Exit-Address-Family - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
- -
EXIT ADDRESS FAMILY

exit-address-family

Overview Use this command to exit either the IPv4 or the IPv6 Address Family Configuration
mode.
exit-address-family
Syntax
Mode [BGP] IPv4 Address Family Configuration
Mode [BGP4+] IPv6 Address Family Configuration
Examples [BGP] To enter and then exit IPv4 Address Family Configuration mode, use the
commands:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router-af)#
awplus(config-router)#
Example To enter and then exit IPv4 Address Family Configuration mode for VRF instance
(VRF-lite) red, use the commands:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router-af)#
awplus(config-router)#
Example [BGP4+] To enter and then exit IPv6 Address Family Configuration mode, use the
commands:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router-af)#
awplus(config-router)#
Related address-family
Commands
Command Version 5.4.6-2.1: VRF-lite support added.
changes
C613-50186-01 Rev B
configure terminal
router bgp 100
address-family ipv4
configure terminal
router bgp 100
address-family ipv4 vrf red
configure terminal
router bgp 100
address-family ipv6
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
exit-address-family
exit-address-family
exit-address-family
1174