Show Arp - Allied Telesis AR2050V Command Reference Manual

IP A P
DDRESSING AND ROTOCOL

SHOW ARP

show arp
Overview Use this command to display entries in the ARP routing and forwarding table—the
ARP cache contains mappings of IP addresses to physical addresses for hosts. To
have a dynamic entry in the ARP cache, a host must have used the ARP protocol to
access another host.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show arp [security [interface [<interface-list>]]
Syntax
show arp [statistics [detail][interface [<interface-list>]]
show arp [global|security|vrf <vrf-name>]
Syntax (VRF-lite)
Mode User Exec and Privileged Exec
Usage Running this command with no additional parameters will display all entries in the
ARP routing and forwarding table.
With VRF-lite configured, and no additional parameters entered, the command
output displays all entries, listed by their VRF instance. By adding either a specific
VRF instance or global parameter entry, you can selectively list ARP entries by their
membership of a specific VRF instance.
Example To display all ARP entries in the ARP cache, use the following command:
awplus#
C613-50186-01 Rev B
C
OMMANDS
Parameter
security
interface
<interface-list>
statistics
detail
global
vrf
<vrf-name>
show arp
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Specify the DHCP Snooping ARP security output option.
Specify an interface list for DHCP Snooping ARP security
output.
Specify a single Layer 3 interface name, or a range of
interfaces.
Specify brief DHCP Snooping ARP security statistics.
Specify detailed DHCP Snooping ARP security statistics.
When VRF-lite is configured, apply this command to the
global routing and forwarding table
Apply this command to the specified VRF instance.
The VRF instance name
"Getting Started
Guide.
684