Show Ipv6 Ospf Interface - Allied Telesis AR2050V Command Reference Manual

OSPF 3 IP 6 C
V FOR V OMMANDS
6
SHOW IPV OSPF INTERFACE

show ipv6 ospf interface

Overview Use this command in User Exec or Privileged Exec modes to display interface
information for OSPF for all interfaces or a specified interface, including OSPFv3
Authentication status for all interfaces or for a specified interface.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ipv6 ospf interface [<interface-name>]
Syntax
Mode User Exec and Privileged Exec
Examples awplus#
Output Figure 28-12: Example output from the show ipv6 ospf interface command
C613-50186-01 Rev B
Parameter
<interface-name>
show ipv6 ospf interface vlan2
showing OSPFv3 Authentication configuration information
highlighted in bold

awplus#show ipv6 ospf interface
vlan2 is up, line protocol is up
Interface ID 302
IPv6 Prefixes
fe80::215:77ff:fead:f87e/64 (Link-Local Address)
Security Policy
MD5 Authentication SPI 1000
NULL Encryption SHA-1 Auth, SPI 1001

OSPFv3 Process (10), Area 0.0.0.0, Instance ID 0
Router ID 192.168.1.2, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State Backup, Priority 1
Interface state Backup
Designated Router (ID) 192.168.1.1
Interface Address fe80::21d:e5ff:fec9:cfbe
Backup Designated Router (ID) 192.168.1.2
Interface Address fe80::215:77ff:fead:f87e
Timer interval configured, Hello 10, Dead 40, Wait 40, 
Retransmit 5
Hello due in 00:00:07
Neighbor Count is 1, Adjacent neighbor count is 1

Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
An alphanumeric string that is the interface name. Omit the
optional interface to display OSPF
"Getting Started
Guide.
1082