Ppp Authentication Refuse - Allied Telesis AR2050V Command Reference Manual

PPP C
OMMANDS

PPP AUTHENTICATION REFUSE

ppp authentication refuse
Overview Use this command in Interface Configuration mode for a PPP interface to refuse
EAP, CHAP (Challenge Handshake Authentication Protocol) or PAP (Password
Authentication Protocol) authentication from peers requesting it.
Use the no form of this command in Interface Configuration mode for a PPP
interface to allow authentication from peers requesting it.
ppp authentication refuse {eap|chap|pap}
Syntax
no ppp authentication refuse
Mode Interface Configuration for a PPP interface
Usage This command specifies that EAP, CHAP or PAP authentication is disabled, so all
requests by the peer for the user to authenticate using EAP, CHAP or PAP are
refused.
Examples To refuse the use of PAP authentication if a peer requests PAP authentication,
enter the commands:
awplus#
awplus(config)#
awplus(config-if)#
To refuse the use of CHAP authentication if a peer requests CHAP authentication,
enter the commands:
awplus#
awplus(config)#
awplus(config-if)#
C613-50186-01 Rev B
Parameter
eap
chap
pap
configure terminal
interface ppp0
configure terminal
interface ppp0
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Use this parameter to specify the router will refuse LCP
configuration requests containing the authentication protocol
option with EAP received on this PPP interface.
Use this parameter to specify the router will refuse LCP
configuration requests containing the authentication protocol
option with CHAP received on this PPP interface.
Use this parameter to specify the router will refuse LCP
configuration requests containing the authentication protocol
option with PAP on this PPP interface.
ppp authentication refuse pap
ppp authentication refuse chap
600