Area Virtual-Link Authentication Ipsec Spi - Allied Telesis AR2050V Command Reference Manual

OSPF 3 IP 6 C
V FOR V OMMANDS
-
AREA VIRTUAL LINK AUTHENTICATION IPSEC SPI

area virtual-link authentication ipsec spi

Overview Use this command in Router Configuration mode to enable authentication for
virtual links in a specified OSPF area.
Use the no variant of this command in Router Configuration mode to disable
authentication for virtual links in a specified OSPF area.
Syntax area <area-id> virtual-link <router-ID> authentication ipsec
spi <256-4294967295> {md5 <MD5-key>|sha1 <SHA1-key>}
no area <area-id> virtual-link <router-ID> authentication ipsec
spi <256-4294967295>
Mode Router Configuration
Usage Use this command on an OSPFv3 area virtual link, use the
spi
Index) value on all interfaces that connect to the same link. SPI values are used by
C613-50186-01 Rev B
Parameter Description
<area-id>
The OSPF area that you are specifying the summary route
default-cost for. This can be entered in either dotted decimal
format or normal decimal format. Use one of the following
formats:
<ip-addr>
<0-
4294967295>
For example, the values 0.0.1.2 and decimal 258 would both
define the same area-ID.
virtual-link
Specify a virtual link and its parameters.
<router-ID>
Enter a router ID associated with a virtual link neighbor in IPv4
address format A.B.C.D.
authentication
Specify this keyword to enable authentication.
ipsec
Specify this keyword to use IPsec authentication.
spi
Specify this keyword to set the SPI (Security Parameters Index).
<256-
Specify an SPI (Security Parameters Index) value in the range 256
4294967295>
to 4294967295, entered as a decimal integer.
md5
Specify the MD5 (Message-Digest 5) encryption algorithm.
<MD5-key>
Enter an MD5 key containing 32 hexadecimal characters.
sha1
Specify the SHA-1 (Secure Hash Algorithm 1) encryption
algorithm.
<SHA1-key>
Enter an SHA-1 key containing 40 hexadecimal characters.
command on an OSPFv3 area. Configure the same SPI (Security Parameters
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
OSPF area-ID expressed in IPv4 address
format A.B.C.D.
OSPF area-ID expressed as a decimal
number within the range shown.
area authentication ipsec
1020