Bgp Nexthop-Trigger-Count - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
- -
BGP NEXTHOP TRIGGER COUNT

bgp nexthop-trigger-count

Overview Use this command to configure the display of BGP next hop tracking status.
Use the no variant of this command to disable this function.
Syntax bgp nexthop-trigger-count <0-127>
no bgp nexthop-trigger-count
Mode Router Configuration
Example To enable next-hop-tracking status on the BGP peer belonging to the Autonomous
System (AS) 100, enter the following commands:
awplus#
awplus(config)#
awplus(config-router)#
To disable next-hop-tracking status, enter the following commands:
awplus#
awplus(config)#
awplus(config-router)#
Related bgp nexthop-trigger delay
Commands
bgp nexthop-trigger enable
show bgp nexthop-tracking (BGP only)
C613-50186-01 Rev B
Parameter
<0-127>
configure terminal
router bgp 100
configure terminal
router bgp 100
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
BGP next hop tracking status.
bgp nexthop-trigger-count 10
no bgp nexthop-trigger-count
1143