L2Tp Peer-Address Radius-Lookup Group - Allied Telesis AR2050V Command Reference Manual

PPP E (PPP E) C
OVER THERNET O
2 - -
L TP PEER ADDRESS RADIUS LOOKUP GROUP

l2tp peer-address radius-lookup group

Overview Use this command to set this PPPoE Access Concentrator (AC) service to get the
LNS address by a RADIUS lookup.
Use the no variant of this command to remove the L2TP peer address setting.
Syntax l2tp peer-address radius-lookup group <radius-group-name>
no l2tp peer-address
Default No L2TP peer address is set by default.
Mode PPPoE Access Concentrator Configuration
Example To find peer address via RADIUS lookup from Radius server group called "GROUP1",
use the commands:
awplus#
awplus(config)#
awplus(config-pppoe-ac)#
GROUP1
To remove the RADIUS lookup setting for the PPPoE AC service 'ISP-service', use
the commands:
awplus#
awplus(config)#
awplus(config-pppoe-ac)#
Related aaa group server
Commands
destination l2tp
l2tp peer-address dns-lookup
l2tp peer-address static
l2tp profile
pppoe-ac
ppp-auth-protocol
service-name
show running-config pppoe-ac
C613-50186-01 Rev B
OMMANDS
Parameter
<radius-group-name>
configure terminal
pppoe-ac ISP-service
configure terminal
pppoe-ac ISP-service
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The name of the RADIUS group to lookup.
l2tp peer-address radius-lookup group
no l2tp peer-address
625