Table of Contents
Advertisement
OSPF C
OMMANDS
SHOW IP OSPF DATABASE NETWORK
show ip ospf database network
Overview
Use this command to display information about the network LSAs.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ip ospf database network [<adv-router-id>]
[self-originate|<adv-router-id>]
Mode
User Exec and Privileged Exec
awplus#
Examples
awplus#
awplus#
Output
Figure 27-8: Example output from the show ip ospf database network
C613-50186-01 Rev B
Parameter
<adv-router-id>
self-originate
adv-router
show ip ospf database network 1.2.3.4 self-originate
show ip ospf database network self-originate
show ip ospf database network 1.2.3.4 adv-router 2.3.4.5
command
OSPF Router process 200 with ID (192.30.30.2)
Net Link States (Area 0.0.0.0)
LS age: 1387
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: network-LSA
Link State ID: 192.10.10.9 (address of Designated Router)
Advertising Router: 192.30.30.3
LS Seq Number: 80000001
Checksum: 0xe1b0
Length: 32
Network Mask: /24
Attached Router: 192.20.20.1
Attached Router: 192.30.30.3
OSPF Router process 200 with ID (192.30.30.2)
Net Link States (Area 0.0.0.0)
...
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The router ID of the advertising router, in IPv4 address format.
Note however, that this no longer represents a real address.
Displays self-originated link states.
Displays all the LSAs of the specified router.
"Getting Started
Guide.
979
- Quick Links:
- Introduction
- Configure Terminal
Hide quick links:
Advertisement
Table of Contents
