Suppress-Ipv4-Updates (Ddns) - Allied Telesis AR2050V Command Reference Manual

D N S (DNS) C
OMAIN AME ERVICE
- 4- (DDNS)
SUPPRESS IPV UPDATES

suppress-ipv4-updates (DDNS)

Overview Use this command to suppress IPv4 updates from being sent.
Use the no variant of this command to stop suppressing IPv4 updates from being
sent.
Syntax suppress-ipv4-updates
no suppress-ipv4-updates
Default Disabled
Mode DDNS Update Method Configuration
Usage This command is used in conjunction with the use-ipv4-for-ipv6-updates
command. IPv4 DDNS updates are suppressed so that only IPv6 updates are sent.
NOTE
Example To suppress IPv4 updates and send IPv6 updates instead for the method "dyndns",
use the commands:
awplus#
awplus(config)#
awplus(config-ddns-update-method)#
awplus(config-ddns-update-method)#
Related ddns-update-method
Commands
use-ipv4-for-ipv6-updates (DDNS)
Command Version 5.4.7-0.1: command added
changes
C613-50186-01 Rev B
OMMANDS
: The IPv4 DNS entry may be updated using the source IPv4 address used.
configure terminal
ddns-update-method-dyndns
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
use-ipv4-for-ipv6-updates
suppress-ipv4-updates
744