Route (Ipv6 Ripng) - Allied Telesis AR2050V Command Reference Manual

RIP IP 6 C
NG FOR V OMMANDS
(IP 6 RIP )
ROUTE V NG

route (IPv6 RIPng)

Overview Use this command to configure static RIPng routes.
Use the no variant of this command to disable this function.
Syntax route <ipv6-addr/prefix-length>
no route <ipv6-addr/prefix-length>
Mode Router Configuration
Usage Use this command to add a static RIPng route. After adding the RIPng route, the
route can be checked in the RIPng routing table.
Example To configure static RIPng routes, use the following commands:
awplus#
awplus(config)#
awplus(config-router)#
Related show ipv6 rip
Commands
clear ipv6 rip route
C613-50186-01 Rev B
Parameter
<ipv6-addr/prefix-length> Specify the IPv6 Address in format X:X::X:X/Prefix-
configure terminal
router ipv6 rip
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Length. The prefix-length is a decimal integer
between 1 and 128.
route 2001:db8::1/64
890