Pppoe-Ac - Allied Telesis AR2050V Command Reference Manual

PPP E (PPP E) C
OVER THERNET O
-
PPPOE AC

pppoe-ac

Overview Use this command to create a PPPoE Access Concentrator (AC) and put the device
into PPPoE Access Concentrator Configuration mode, in which subsequent
commands can be entered.
Use the no variant of this command to remove the PPPoE AC and all its
configuration.
pppoe-ac <label>
Syntax
no pppoe-ac <label>
Default No PPPoE AC services are configured by default.
Mode Global Configuration
Example To configure a PPPoE AC called "ISP-service", use the commands:
awplus#
awplus(config)#
awplus(config-pppoe-ac)#
To remove a PPPoE AC called "ISP-service" and its configuration, use the
commands:
awplus#
awplus(config)#
Related destination l2tp
Commands
l2tp peer-address dns-lookup
l2tp peer-address radius-lookup group
l2tp peer-address static
l2tp profile
pppoe-ac
ppp-auth-protocol
pppoe-ac-service
service-name
show running-config pppoe-ac
C613-50186-01 Rev B
OMMANDS
Parameter Description
<label>
A unique label for the PPPoE AC service.
configure terminal
pppoe-ac ISP-service
configure terminal
no pppoe-ac ISP-service
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
631