Allied Telesis AR2050V Command Reference Manual page 1122

BGP BGP4+ C
AND OMMANDS
-
BGP CLUSTER ID
To remove a bgp cluster-id apply the example commands as shown below:
awplus#
awplus(config)#
awplus(config-router)#
Related bgp client-to-client reflection
Commands
neighbor route-reflector-client (BGP only)
show bgp ipv6 (BGP4+ only)
show ip bgp (BGP only)
C613-50186-01 Rev B
configure terminal
router bgp 100
no bgp cluster-id 10.10.1.1
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1122