Interface (Ppp) - Allied Telesis AR2050V Command Reference Manual

PPP C
OMMANDS
(PPP)
INTERFACE

interface (PPP)

Overview Use this command to select a PPP interface to configure.
You need to use the
and create PPP interfaces first.
Syntax interface <PPP-interface-list>
Mode Global Configuration
Example The following example shows how to enter Interface mode to configure a PPP
interface.
awplus#
awplus(config)#
awplus(config-if)#
Related ip address (IP Addressing and Protocol)
Commands
show interface
show interface brief
C613-50186-01 Rev B
encapsulation ppp
Parameter
<PPP-interface-list> The PPP interfaces or ports to configure. An interface-list
configure terminal
interface ppp0
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
command to enable PPP encapsulation
Description
can be:
• a PPP interface (e.g. ppp0)
• a continuous range of PPP interfaces, separated by a
hyphen (e.g. ppp0-ppp2)
• a comma-separated non-continuous list of PPP
interfaces (e.g. ppp0,ppp2)
The specified interfaces must exist.
582