Show Ip Protocols Bgp (Bgp Only) - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
(BGP
SHOW IP PROTOCOLS BGP

show ip protocols bgp (BGP only)

Overview Use this command to display BGP process parameters and statistics.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip protocols bgp
Mode User Exec and Privileged Exec
Example To display BGP process parameters and statistics, use the command:
awplus#
Output Figure 29-17: Example output from the show ip protocols bgp command
Routing Protocol is "bgp 100"
IGP synchronization is disabled
Automatic route summarization is disabled
Default local-preference applied to incoming route is 100
Redistributing:
Neighbor(s):
Address AddressFamily FiltIn FiltOut DistIn DistOut RouteMapIn RouteMapOut 
Weight
10.10.10.1
C613-50186-01 Rev B
)
ONLY
show ip protocols bgp
unicast
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
1375