Allied Telesis AR2050V Command Reference Manual page 685

IP A P
DDRESSING AND ROTOCOL
SHOW ARP
Output Figure 21-3: Example output from the show arp command
awplus#show arp

IP Address MAC Address
192.168.10.2 0015.77ad.fad8
192.168.20.2 0015.77ad.fa48
192.168.1.100 00d0.6b04.2a42
Example To display the dynamic ARP entries in the global routing instance, use the
(VRF-lite) command:
awplus#
Output Figure 21-4: Example output from the show arp global command
awplus#show arp global

IP Address MAC Address
192.168.10.2 0015.77ad.fad8
192.168.20.2 0015.77ad.fa48
192.168.1.100 00d0.6b04.2a42
Example To display the dynamic ARP entries for a VRF instance 'red', use the command:
(VRF-lite)
awplus#
Output Figure 21-5: Example output from the show arp vrf red command
awplus# show arp vrf red

[VRF: red]
IP Address
192.168.10.2
Table 22: Parameters in the output of the show arp command
C613-50186-01 Rev B
C
OMMANDS
Interface
vlan1
vlan2
vlan2
show arp global
Interface
vlan1
vlan2
vlan2
show arp vrf red
MAC Address Interface
0015.77ad.fad8 vlan1
Parameter
IP Address
MAC Address
Interface
Port
Type
VRF
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Port
port1.0.1
port1.0.2
port1.0.6
Port
port1.0.1
port1.0.2
port1.0.8
Port
port1.0.1
Meaning
IP address of the network device this entry maps to.
Hardware address of the network device.
Interface over which the network device is accessed.
Physical port that the network device is attached to.
Whether the entry is a static or dynamic entry. Static
entries are added using the
command. Dynamic entries are learned from ARP
request/reply message exchanges.
The name of the VRF instance. The VRF-lite components
only display when VRF-lite is configured.
Type 
dynamic
dynamic
static
Type
dynamic
dynamic
static
Type
dynamic
arp (IP address MAC)
685