BGP
BGP4+ C
AND
OMMANDS
NEIGHBOR INTERFACE
neighbor interface
Overview
Use this command to configure the interface name of a BGP4+ speaking neighbor.
Use the no variant of this command to disable this function.
Syntax [BGP4+]
neighbor {<ipv6-addr>|<ipaddress>} interface <interface>
no neighbor {<ipv6-addr>|<ipaddress>} interface <interface>
Mode [BGP4+]
Router Configuration
Usage [BGP4+]
This command is for use with BGP4+ peering. Use this command for BGP peering
with IPv6 link local addresses.
Examples
awplus#
[BGP4+]
awplus(config)#
awplus(config-router)#
awplus#
awplus(config)#
awplus(config-router)#
awplus#
awplus(config)#
awplus(config-router)#
vlan2
awplus#
awplus(config)#
awplus(config-router)#
vlan2
C613-50186-01 Rev B
Parameter
Description
<ipaddress>
Specifies the IPv4 address of the BGP neighbor - entered in dotted
decimal notation in the format A.B.C.D.
<ipv6-addr>
Specifies the IPv6 address of the BGP4+ neighbor, entered in
hexadecimal in the format X:X::X:X.
<interface>
Specifies the interface name of BGP neighbor, e.g. vlan2.
configure terminal
router bgp 10
configure terminal
router bgp 10
configure terminal
router bgp 10
configure terminal
router bgp 10
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
neighbor 10.10.0.72 interface vlan2
no neighbor 10.10.0.72 interface vlan2
neighbor 2001:0db8:010d::1 interface
no neighbor 2001:0db8:010d::1 interface
1238