Debug Pppoe-Ac - Allied Telesis AR2050V Command Reference Manual

PPP E (PPP E) C
OVER THERNET O
-
DEBUG PPPOE AC

debug pppoe-ac

Overview Use this command to enable debugging of the PPPoE Access Concentrator.
Use the no variant of this command to disable debugging of the PPPoE Access
Concentrator.
Syntax debug pppoe-ac
no debug pppoe-ac
Default PPPoE Access Concentrator debugging is disabled by default.
Mode Privileged Exec
Example To enable PPPoE AC debugging, use the commands:
awplus#
awplus#
% Warning: Console logging enabled
Related debug l2tp
Commands
show debugging pppoe ac
C613-50186-01 Rev B
OMMANDS
Parameter Description
<varname>
Description of varname
debug pppoe-ac
terminal monitor
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
621