Show Ip Route Database - Allied Telesis AR2050V Command Reference Manual

R C
OUTING OMMANDS

SHOW IP ROUTE DATABASE

show ip route database
Overview This command displays the routing entries in the RIB (Routing Information Base).
When multiple entries are available for the same prefix, RIB uses the routes'
administrative distances to choose the best route. All best routes are entered into
the FIB (Forwarding Information Base). To view the routes in the FIB, use the
ip route
To modify the lines displayed, use the | (output modifier token); to save the output
to a file, use the > output redirection token.
show ip route database [bgp|connected|ospf|rip|static]
Syntax
show ip route [vrf <vrf-name>|global] database
Syntax (VRF-lite)
[bgp|connected|ospf|rip|static]
Mode User Exec and Privileged Exec
Example To display the static routes in the RIB, use the command:
awplus#
C613-50186-01 Rev B
command.
Parameter Description
global
If VRF-lite is configured, apply the command to the global routing
and forwarding table.
vrf
Apply the command to the specified VRF instance.
<vrf-name>
The name of the VRF instance.
bgp
Displays only the routes learned from BGP.
connected
Displays only the routes learned from connected interfaces.
ospf
Displays only the routes learned from OSPF.
rip
Displays only the routes learned from RIP.
static
Displays only the static routes you have configured.
show ip route database static
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
show
804