Neighbor Advertisement-Interval - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
-
NEIGHBOR ADVERTISEMENT INTERVAL

neighbor advertisement-interval

Overview Use this command to set the minimum interval between sending iBGP or eBGP
routing updates for a given route. This command reduces the flapping of
individual routes.
Use the no variant of this command to set the interval time to the default values
(30 seconds for eBGP peers and 5 seconds for iBGP peers) for a given route.
neighbor <neighborid> advertisement-interval <time>
Syntax
no neighbor <neighborid> advertisement-interval [<time>]
Default The default interval between sending routing updates for a given route to eBGP
peers is 30 seconds, and the default interval for a given route to iBGP peers is 5
seconds.
Mode Router Configuration
Usage Use this command to set the minimum interval between sending iBGP or eBGP
routing updates for a given route. To reduce the flapping of routes to the internet,
set a minimum advertisement interval, so iBGP or eBGP routing updates are sent
per interval seconds.
BGP dampening can also be used to control the effects of flapping routes. See the
bgp dampening
more information.
The advertisement-interval time value is the minimum time between the
advertisement of Update messages sent from a BGP speaker to report changes to
C613-50186-01 Rev B
Parameter Description
<neighborid> {<ip-address>|<ipv6-addr>|<peer-group>}
<ip-address>
<ipv6-addr>
<peer-group>
<time> <0-600>
command in this chapter, and the
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Specify the address of an IPv4 BGP neighbor,
in dotted decimal notation A.B.C.D.
Specify the address of an IPv6 BGP4+
neighbor, entered in hexadecimal in the
format X:X::X:X.
Enter the name of an existing peer-group. For
information on how to create peer groups,
refer to the neighbor peer-group (add a
neighbor) command, and
route-map command. When this parameter is
used with this command, the command
applies on all peers in the specified group.
Note that if you apply an
advertisement-interval value to a peer group
it will apply to all members in the peer group.
Advertisement -interval value in seconds.
Routing_Protocol Guide
neighbor
for
1196