Area Filter-List - Allied Telesis AR2050V Command Reference Manual

OSPF C
OMMANDS
-
AREA FILTER LIST

area filter-list

Overview This command configures filters to advertise summary routes on Area Border
Routers (ABR).
This command is used to suppress particular intra-area routes from/to an area
to/from the other areas. You can use this command in conjunction with the
prefix-list command.
The no variant of this command removes the filter configuration.
area <area-id> filter-list prefix <prefix-list> {in|out}
Syntax
no area <area-id> filter-list prefix <prefix-list> {in|out}
Mode Router Configuration
C613-50186-01 Rev B
Parameter Description
<area-id>
The OSPF area that you are configuring the filter for. Use one of
the following formats: This can be entered in either dotted
decimal format or normal decimal format.
<ip-addr>
<0-4294967295>
For example the values dotted decimal 0.0.1.2 and decimal 258
would both define the same area ID.
prefix
Use prefix-list to filter summary.
<prefix-list>
Name of a prefix-list.
in
Filter routes from the other areas to this area.
out
Filter routes from this area to the other areas.
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
OSPF Area ID expressed in IPv4 address
format A.B.C.D.
OSPF Area ID expressed as a decimal
number within the range shown.
904