Ppp Ipcp Ip-Override - Allied Telesis AR2050V Command Reference Manual

PPP C
OMMANDS
-
PPP IPCP IP OVERRIDE

ppp ipcp ip-override

Overview Use this command to override the IP address negotiated via IPCP with peer and use
the statically configured address on a given PPP interface.
Use the no variant of this command to use any address negotiated with the peer
via IPCP on a given PPP interface.
Syntax ppp ipcp ip-override
no ppp ipcp ip-override
Default By default the address is negotiated with the peer via IPCP.
Mode Interface Configuration
Examples To override the IP address negotiated with the peer via IPCP and use statically
configured address on interface ppp0, use the commands below:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
Related show running-config interface
Commands
C613-50186-01 Rev B
configure terminal
interface ppp0
ip address 192.168.1.100/24
ppp ipcp ip-override
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
608