Allied Telesis AR2050V Command Reference Manual page 1195

BGP BGP4+ C
AND OMMANDS
NEIGHBOR ACTIVATE
Examples To enable an exchange of routes in IPv6 Address Family Configuration mode with
[BGP4+] a neighboring router with the IPv6 address 2001:0db8:010d::1, enter the
commands as shown below:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router-af)#
To disable an exchange of routes in IPv6 Address Family Configuration mode with
a neighboring router with the IPv6 address 2001:0db8:010d::1, enter the
commands as shown below:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router-af)#
activate
To enable an exchange of routes with a neighboring router with the peer-group
named group1, enter the commands as shown below:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router)#
awplus(config-router)#
awplus(config-router-af)#
peer-group group1
awplus(config-router-af)#
To disable an exchange of routes with a neighboring router with the peer-group
named group1, enter the commands as shown below:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router-af)#
Related neighbor peer-group (add a neighbor)
Commands
neighbor route-map
Command Version 5.4.6-2.1: VRF-lite support added.
changes
C613-50186-01 Rev B
configure terminal
router bgp 10
address-family ipv6
configure terminal
router bgp 10
address-family ipv6
configure terminal
router bgp 10
neighbor group1 peer-group
neighbor 2001:0db8:010d::1 remote-as 10
address-family ipv6
configure terminal
router bgp 10
address-family ipv6
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
neighbor 2001:0db8:010d::1 activate
no neighbor 2001:0db8:010d::1
neighbor 2001:0db8:010d::1
neighbor group1 activate
no neighbor group1 activate
1195