Router-Id (Vrf) - Allied Telesis AR2050V Command Reference Manual

VRF- C
LITE OMMANDS
- (VRF)
ROUTER ID

router-id (VRF)

Overview Use this command to specify a router identifier (in IP address format). When using
VRF-Lite, the router-id is configured for the specified VRF instance.
Use the no variant of this command to force OSPF to use the previous OSPF
router-id behavior.
Syntax router-id <ip-address>
no router-id
Mode Router Configuration
Usage Configure each router with a unique router-id. In an OSPF router process that has
active neighbors, a new router-id is used at the next reload or when you restart
OSPF manually.
The following example shows a fixed router ID 10.10.10.60 for the VRF
Example
instance red:
awplus#
awplus(config)#
awplus(config-router)#
Related show ip ospf
Commands
show ip vrf
C613-50186-01 Rev B
Parameter Description
<ip-address> Specifies the router ID in IPv4 address format.
configure terminal
ip vrf red
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
router-id 10.10.10.60
1497