Show Ip Bgp Dampening (Bgp Only) - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
(BGP
SHOW IP BGP DAMPENING

show ip bgp dampening (BGP only)

Overview Use this command to show dampened routes from a BGP instance within an IPv4
environment. Use the
an IPv6 environment.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip bgp dampening
Syntax
{dampened-paths|flap-statistics|parameters}
Syntax [VRF] show ip bgp [global|vrf <vrf-name>] dampening
{dampened-paths|flap-statistics|parameters}
Mode User Exec and Privileged Exec
Usage Enable BGP dampening to maintain dampened-path information in memory.
awplus#
Examples
awplus#
awplus#
Output Figure 29-11: Example output from the show ip bgp dampening command
The following example output shows that the internal route (i), has flapped 3
times and is now categorized as history (h).
C613-50186-01 Rev B
)
ONLY
show bgp ipv6 dampening (BGP4+ only)
Parameter
global
vrf
<vrf-name>
dampened-paths
flap-statistics
parameters
show ip bgp dampening dampened-paths
show ip bgp vrf red dampening dampened-paths
show ip bgp global dampening flap-statistics
dampening 15 750 2000 60 15
Reachability Half-Life time
Reuse penalty
Suppress penalty
Max suppress time
Un-reachability Half-Life time : 15 min
Max penalty (ceil)
Min penalty (floor)
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
When VRF-lite is configured, apply the command to the global
routing and forwarding table.
Apply the command to the specified VRF instance.
The name of the VRF instance.
Display paths suppressed due to dampening.
Display flap statistics of routes.
Display details of configured dampening parameters.
: 15 min
: 750
: 2000
: 60 min
: 11999
: 375
command within
"Getting Started
Guide.
1345