Allied Telesis AR2050V Command Reference Manual page 1273

BGP BGP4+ C
AND OMMANDS
-
NEIGHBOR ROUTE MAP
The following example shows the configuration of the route-map name rmap2
and then the use of this map name in the neighbor route-map command for the
neighbor with the peer group named group1 in the Router Configuration mode.
awplus#
awplus(config)#
awplus(config-route-map)#
awplus(config-route-map)#
awplus(config-route-map)#
awplus(config)#
awplus(config-router)#
awplus(config-router)#
awplus(config-router)#
awplus(config-router-af)#
peer-group group1
awplus(config-router-af)#
The following example shows the removal the route-map name rmap2 in the
neighbor route-map command for the neighbor with the peer group named
group1 in the Router Configuration mode.
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router-af)#
Related address-family
Commands
neighbor peer-group (add a neighbor)
route-map
C613-50186-01 Rev B
configure terminal
route-map rmap2 permit 6
router bgp 10
neighbor group1 peer-group
neighbor 2001:0db8:010d::1 remote-as 10
address-family ipv6
configure terminal
router bgp 10
address-family ipv6
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
match origin incomplete
set metric 100
exit
neighbor 2001:0db8:010d::1
neighbor group1 route-map rmap2 in
no neighbor group1 route-map rmap2 in
1273