Set Extcommunity - Allied Telesis AR2050V Command Reference Manual

R M C
OUTE AP OMMANDS

SET EXTCOMMUNITY

set extcommunity
Overview Use this command to add an extended community set clause to a route map entry.
A route map entry can have a route target extended community set clause, a
site-of-origin extended community set clause, or both.
When a BGP update message matches the route map entry, the device sets the
update's extended community attribute to the specified value or values.
Use the no variant of this command to remove the set clause.
set extcommunity {rt|soo} <extcomm-number>
Syntax
no set extcommunity {rt|soo} [<extcomm-number>]
Mode Route-map Configuration
Usage This command is valid for BGP update messages only.
To use entry 3 of the route map called rmap1 to set the route target extended
Examples
community attribute to 06:01, use the commands:
awplus#
awplus(config)#
awplus(config-route-map)#
To instead specify the extended community number in dotted decimal notation,
use the command:
awplus#
awplus(config)#
awplus(config-route-map)#
To use entry 3 of the route map called rmap1 to set the site-of-origin extended
community attribute to 06:01, use the commands:
awplus#
awplus(config)#
awplus(config-route-map)#
C613-50186-01 Rev B
Parameter
rt
soo
<extcomm-number>
configure terminal
route-map rmap1 permit 3
configure terminal
route-map rmap1 permit 3
configure terminal
route-map rmap1 permit 3
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Configure a route target extended community. This consists
of routers that will receive matching routes.
Configure a site-of-origin extended community. This
consists of routers that will inject matching routes into BGP.
The extended community number, in the format AA:NN or
IPADD:N.
set extcommunity rt 06:01
set extcommunity rt 0.0.0.6:01
set extcommunity soo 06:01
1408