Bgp Update-Delay - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
-
BGP UPDATE DELAY

bgp update-delay

Overview Use this command to specify the update-delay value for a graceful-restart capable
router.
Use the no variant of this command to revert to the default update-delay value.
Syntax bgp update-delay <1-3600>
no bgp update-delay [<1-3600>]
Default The default update-delay value is 120 seconds.
Mode Router Configuration
Usage The update-delay value is the maximum time a graceful-restart capable router
which is restarting will defer route-selection and advertisements to all its
graceful-restart capable neighbors. This maximum time starts from the instance
the first neighbor attains established state after restart. The restarting router
prematurely terminates this timer when end-of-rib markers are received from all its
graceful-restart capable neighbors.
awplus#
Example
awplus(config)#
awplus(config-router)#
C613-50186-01 Rev B
Parameter Description
<1-3600>
Delay value in seconds.
configure terminal
router bgp 10
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
bgp update-delay 345
1150