Allied Telesis AR2050V Command Reference Manual page 964

OSPF C
OMMANDS
(OSPF)
REDISTRIBUTE
The following example shows the configuration of a route-map named rmap2,
Example
which is then applied using the redistribute route-map command, so routes
learned via interface vlan1 can be redistributed as type-1 external LSAs:
awplus#
awplus(config)#
awplus(config-route-map)#
awplus(config-route-map)#
awplus(config-route-map)#
awplus(config)#
awplus(config-router)#
Note that configuring a route-map and applying it with the redistribute
route-map command allows you to filter which routes are distributed from
another routing protocol (such as RIP). A route-map can also set the metric, tag,
and metric-type of the redistributed routes.
Related match interface
Commands
route-map
show ip ospf database external
C613-50186-01 Rev B
configure terminal
route-map rmap2 permit 3
router ospf 100
redistributebgp rip route-map rmap2
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
match interface vlan1
set metric-type 1
exit
964