Clear Bgp Ipv6 External (Bgp4+ Only) - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
6 (BGP4+
CLEAR BGP IPV EXTERNAL

clear bgp ipv6 external (BGP4+ only)

Overview Use this command to reset the BGP4+ connections to all external peers.
clear bgp ipv6 external [in [prefix-filter]|out|soft [in|out]]
Syntax
clear bgp ipv6 external
clear bgp ipv6 external in [prefix-filter]
clear bgp ipv6 external out
clear bgp ipv6 external soft [in|out]
Mode Privileged Exec
Examples awplus#
awplus#
awplus#
awplus#
awplus#
C613-50186-01 Rev B
)
ONLY
Parameter Description
external
Clears all external peers.
in
Indicates that incoming advertised routes will be cleared.
prefix-filter
Specifies that a prefix-list will be sent, by the ORF mechanism, to
those neighbors with which the ORF capability has been
negotiated. The neighbors will be triggered to resend updates,
which match the prefix-list filter, to the local router. The local
router will then perform a soft reconfiguration.
out
Indicates that outgoing advertised routes will be cleared.
soft in
Soft inbound reset causes the neighbors to resend all their
updates to the local device, without resetting the connection or
clearing the entries in the local device. So, the local device stores
new updates, and uses them to systematically replace existing
table entries. This process can use a considerable amount of
memory.
soft out
Soft outbound reset causes the device to simply resend all its
updates to the specified neighbor(s), without resetting the
connection, or clearing table entries.
clear bgp ipv6 external in
clear bgp ipv6 external in prefix
clear bgp ipv6 external out
clear bgp ipv6 external soft out
clear bgp ipv6 external soft in
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1169