Ip Route Static Inter-Vrf - Allied Telesis AR2050V Command Reference Manual

VRF- C
LITE OMMANDS
-
IP ROUTE STATIC INTER VRF

ip route static inter-vrf

Overview Applying this command enables static inter-VRF routing. Note that static inter-VRF
routing must be enabled before you can use the ip route command to create a
static inter-VRF route.
The no variant of this command disables static inter-VRF routing.
Syntax ip route static inter-vrf
no ip route static inter-vrf
Mode VRF Configuration
Default Static inter-VRF routing is enabled.
Example To enable static inter-VRF routing, use the following commands:
awplus#
awplus(config)#
Related ip route
Commands
show ip route
Command Version 5.4.6-2.1: VRF-lite support added.
changes
C613-50186-01 Rev B
config terminal
ip route static inter-vrf
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1461