Clear Ip Bgp External (Bgp Only) - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
(BGP
CLEAR IP BGP EXTERNAL ONLY

clear ip bgp external (BGP only)

Overview Use this command to reset the BGP connections to all external peers.
clear ip bgp external [in [prefix-filter]|out|soft [in|out]]
Syntax
clear ip bgp external
clear ip bgp external in [prefix-filter]
clear ip bgp external out
clear ip bgp external soft [in|out]
Mode Privileged Exec
Examples awplus#
C613-50186-01 Rev B
)
Parameter Description
external
Clears all external peers.
ipv4
Clears all IPv4 address family peers. Configure parameters relating
to the BGP exchange of IPv4 prefixes.
in
Indicates that incoming advertised routes will be cleared.
prefix-filter
Specifies that a prefix-list will be sent, by the ORF mechanism, to
those neighbors with which the ORF capability has been
negotiated. The neighbors will be triggered to resend updates,
which match the prefix-list filter, to the local router. The local
router will then perform a soft reconfiguration.
out
Indicates that outgoing advertised routes will be cleared.
soft in
Soft inbound reset causes the neighbors to resend all their
updates to the local device, without resetting the connection or
clearing the entries in the local device. So, the local device stores
new updates, and uses them to systematically replace existing
table entries. This process can use a considerable amount of
memory.
soft out
Soft outbound reset causes the device to simply resend all its
updates to the specified neighbor(s), without resetting the
connection, or clearing table entries.
clear ip bgp external out
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1163