Table of Contents
Advertisement
OSPF C
OMMANDS
-
SHOW IP OSPF VIRTUAL
LINKS
show ip ospf virtual-links
Overview
Use this command to display virtual link information.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ip ospf virtual-links
Mode
User Exec and Privileged Exec
Examples
To display virtual link information, use the command:
awplus#
Output
Figure 27-22: Example output from the show ip ospf virtual-links command
C613-50186-01 Rev B
show ip ospf virtual-links
Virtual Link VLINK0 to router 10.10.0.9 is up
Transit area 0.0.0.1 via interface vlan5
Transmit Delay is 1 sec, State Point-To-Point,
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Retransmit 5
Hello due in 00:00:02
Adjacency state Full
Virtual Link VLINK1 to router 10.10.0.123 is down
Transit area 0.0.0.1 via interface *
Transmit Delay is 1 sec, State Down,
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Retransmit 5
Hello due in inactive
Adjacency state Down
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
994
- Quick Links:
- Introduction
- Configure Terminal
Hide quick links:
Advertisement
Table of Contents
