Ppp Password - Allied Telesis AR2050V Command Reference Manual

PPP C
OMMANDS

PPP PASSWORD

ppp password
Overview Use this command in Interface Configuration mode for a PPP interface to configure
a PPP secret password to be used in response to a challenge from an unknown
remote peer.
Use the no form of this command in Interface Configuration mode for a PPP
interface to disable a configured PPP secret password.
ppp password <password>
Syntax
no ppp password
Default There is no PPP password defined or configured to a PPP interface by default.
Mode Interface Configuration for a PPP interface
To enable the use of the PPP secret password bobs_secret for PPP
Examples
authentication, enter the commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable the use of the PPP secret password bobs_secret for PPP
authentication, enter the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ppp authentication
Commands
ppp username
C613-50186-01 Rev B
Parameter Description
<password>
Specify this parameter to configure a PPP secret password to be used
in response to an unknown remote peer. You can use any printable
characters, including spaces. A password can contain up to 255
printable characters.
configure terminal
interface ppp0
configure terminal
interface ppp0
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
ppp password bobs_secret
no ppp password
609