Match Ipv6 Next-Hop - Allied Telesis AR2050V Command Reference Manual

R M C
OUTE AP OMMANDS
6 -
MATCH IPV NEXT HOP

match ipv6 next-hop

Overview Use this command to specify a next-hop address to be matched by the route-map.
Use the no variant of this command to disable this function.
Syntax
Mode Route-map Configuration
Usage The match ipv6 next-hop command specifies the next-hop address to be
matched. If there is a match for the specified next-hop address, and permit is
specified, the route is redistributed or controlled as specified by the set action. If
the match criteria are met, and deny is specified, the route is not redistributed or
controlled. If the match criteria are not met, the route is neither accepted nor
forwarded, irrespective of permit or deny specifications.
NOTE
C613-50186-01 Rev B
Parameter
<prefix-listname>
: This command is valid only for BGP.
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The name of the IPv6 prefix list that specifies criteria for the
addresses to be matched.
1391