Neighbor Attribute-Unchanged - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
-
NEIGHBOR ATTRIBUTE UNCHANGED

neighbor attribute-unchanged

Overview Use this command to advertise unchanged BGP or BGP4+ attributes to the
specified BGP or BGP4+ neighbor.
Use the no variant of this command to disable this function.
Syntax neighbor <neighborid> attribute-unchanged
{as-path|next-hop|med}
no neighbor <neighborid> attribute-unchanged
{as-path|next-hop|med}
Mode [BGP] Router Configuration or IPv4 Address Family Configuration
Mode [BGP4+] IPv6 Address Family Configuration
Usage Note that specifying this command with the optional as-path parameter has the
same effect as invoking the
Note this specifying this command with the optional next-hop parameter has the
same effect as invoking the
C613-50186-01 Rev B
Parameter Description
<neighborid> {<ip-address>|ipv6-addr>|<peer-group>}
<ip-address> Specify the address of an IPv4 BGP neighbor, in
<ipv6-addr>
<peer-group> Enter the name of an existing peer-group. For
as-path
AS path attribute.
next-hop
Next hop attribute.
med
Multi Exit Discriminator.
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
dotted decimal notation A.B.C.D.
Specify the address of an IPv6 BGP4+ neighbor,
entered in hexadecimal in the format X:X::X:X.
information on how to create peer groups, refer
to the neighbor peer-group (add a neighbor)
command, and
When this parameter is used with this
command, the command applies on all peers in
the specified group.
neighbor transparent-as
neighbor transparent-nexthop
neighbor route-map command.
command.
command.
1204