Bgp Bestpath Med Remove-Recv-Med - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
-
BGP BESTPATH MED REMOVE RECV

bgp bestpath med remove-recv-med

Overview This command removes the Multi Exit Discriminator (MED) attribute from the
update messages received by the BGP speaker from its peers. However, the local
BGP speaker will send MED attributes in the update messages to its peers, unless
specified not to by the bgp bestpath med remove-send-med command.
Use the no variant of this command to disable this feature.
bgp bestpath med remove-recv-med
Syntax
no bgp bestpath med remove-recv-med
Mode Router Configuration
Example To enable the remove-recv-med feature on the BGP speaker belonging to the
Autonomous System (AS) 100, enter the command:
awplus#
awplus(config)#
awplus(config-router)#
Related bgp bestpath med remove-send-med
Commands
C613-50186-01 Rev B
-
MED
configure terminal
router bgp 100
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
bgp bestpath med remove-recv-med
1118